OpenLegislation

Division 2.8 INFORMATION DOCUMENT DATA ENTRIES

Original text. Later amendments are not shown.

OJ L 72, 14.3.2008, p. 1.

OJ L 120, 7.5.2011, p. 1.

Regulation (EC) No 79/2009 of the European Parliament and of the Council of 14 January 2009 on type-approval of hydrogen-powered motor vehicles, and amending Directive 2007/46/EC (OJ L 35, 4.2.2009, p. 32).

OJ L 120, 7.5.2011, p. 1.

OJ L 72, 14.3.2008, p. 1.
Item No.(Sub) categoriesDetailed information
0. GENERAL INFORMATION
A. General information concerning vehicles
0.1. L1e — L7e Make (trade name of manufacturer): …
0.2. L1e — L7e Type(17) : …
0.2.1L1e — L7eVariant(s)(17): …
0.2.2L1e — L7eVersion(s)(17): …
0.2.3.L1e — L7eCommercial name(s) (if available): …
0.3. L1e — L7e Category, subcategory and sub-subcategory of vehicle(2) : …
0.4. L1e — L7e Company name and address of manufacturer: …
0.4.1.L1e — L7eName(s) and address(es) of assembly plants: …
0.4.2.L1e — L7eName and address of manufacturer’s authorised representative, if any: …
0.5. L1e — L7e Manufacturer’s statutory plate(s): …
0.5.1.L1e — L7eLocation of the manufacturer's statutory plate(15)(18): …
0.5.2.L1e — L7eMethod of attachment: …
0.5.3.L1e — L7ePhotographs and/or drawings of the statutory plate (completed example with dimensions): …
0.6. L1e — L7e Location of the vehicle identification number(15) : …
0.6.1.L1e — L7ePhotographs and/or drawings of the locations of the vehicle identification number (completed example with dimensions): …
0.6.1.1.L1e — L7eThe serial number of the type begins with: …
B. General information concerning systems, components or separate technical units
0.7.L1e — L7e Make(s) (trade name(s) of manufacturer): …
0.8. L1e — L7e Type: …
0.8.1.L1e — L7eCommercial name(s) (if available): …
0.8.2.L1e — L7eType-approval number(s) (if available): …
0.8.3.L1e — L7eType-approval(s) issued on (date, if available): …
0.9.L1e — L7e Company name and address of manufacturer: …
0.9.1.L1e — L7eName(s) and address(es) of assembly plants: …
0.9.2.L1e — L7eName and address of manufacturer’s authorised representative, if any: …
0.10. Vehicle(s) for which the system/separate technical unit is intended for(21) : …
0.10.1.L1e — L7eType(17): …
0.10.2.L1e — L7eVariant(17): …
0.10.3.L1e — L7eVersion(17): …
0.10.4.L1e — L7eCommercial name(s) (if available): …
0.10.5.L1e — L7eCategory, subcategory and sub-subcategory of vehicle(2): …
0.11.L1e — L7e Type-approval marks for components and separate technical units(19) : …
0.11.1.L1e — L7eMethod of attachment: …
0.11.2.L1e — L7ePhotographs and/or drawings of the location of the type-approval mark (completed example with dimensions): …
C. General information regarding conformity of production and access to repair and maintenance information
0.12. Conformity of production
0.12.1.L1e — L7eDescription of overall quality-assurance management systems.
0.13. Access to repair and maintenance information
0.13.1.L1e — L7eAddress of principal website for access to vehicle repair and maintenance information: …
0.13.2.L1e — L7eIn the case of multi-stage type-approval, address of principal website for access to vehicle repair and maintenance information from manufacturer(s) at previous stage(s):
1. GENERAL CONSTRUCTION CHARACTERISTICS
1.1.L1e — L7ePhotographs and/or drawings of a representative vehicle: …
1.2.L1e — L7eScale drawing of the whole vehicle: …
1.3.L1e — L7eNumber of axles and wheels: …
1.3.1.L1e — L7eAxles with twinned wheels(23): …
1.3.2.L1e — L7ePowered axles(23): …
1.4.L1e — L7eChassis (if any) (overall drawing): …
1.5.L2e, L5e-B, L6e-B, L7e-A2, L7e-B2, L7e-CMaterial used for the bodywork:
1.6.L1e — L7ePosition and arrangement of the propulsion(s): …
1.7.L4e, L5e-B, L6e-B, L7e-A2, L7e-B2, L7e-CHand of drive: left/right/centre(4): …
1.7.1.L1e — L7eVehicle is equipped to be driven in right/left-hand traffic and in countries that use metric/metric and imperial units.(4): …
1.8. Propulsion unit performance
1.8.1.L3e, L4e, L5e, L7e-A, L7e-B2Declared maximum vehicle speed: … km/h
1.8.2.L1e, L2e, L6e, L7e-B1, L7e-CMaximum design vehicle speed (22): … km/h and gear in which it is reached: …
1.8.3.L1e — L7eMaximum net power combustion engine: … kW at … min-1 at A/F ratio: …
1.8.4.L1e — L7eMaximum net torque combustion engine: … Nm at … min-1 at A/F ratio: …
1.8.5.L1e — L7eMaximum continuous-rated power electric motor (15/30(4) minutes power(27)): … kW at … min–1
1.8.6.L1e — L7eMaximum continuous-rated torque electric motor: … Nm at … min-1
1.8.7.L1e — L7eMaximum continuous total power for propulsion(s): …. kW at …. min-1 at A/F ratio: …
1.8.8.L1e — L7eMaximum continuous total torque for propulsion(s): … Nm at … min-1 at A/F ratio: …
1.8.9.L1e — L7eMaximum peak power for propulsion(s): … kW at … min-1at A/F ratio: …
2.

MASSES AND DIMENSIONS

(in kg and mm.) refer to drawings where applicable

2.1 Range of vehicle mass (overall)
2.1.1.L1e — L7eMass in running order: … kg
2.1.1.1.L1e — L7eDistribution of mass in running order between the axles: … kg
2.1.2.L1e — L7eActual mass: … kg
2.1.2.1.L1e — L7eDistribution of actual mass between the axles: … kg
2.1.3.L1e — L7eTechnically permissible maximum laden mass: … kg
2.1.3.1.L1e — L7eTechnically permissible maximum mass on front axle: … kg
2.1.3.2.L1e — L7eTechnically permissible maximum mass on rear axle: … kg
2.1.3.3.L4eTechnically permissible maximum mass on sidecar axle: … kg
2.1.4.L1e — L7eMaximum hill-starting ability at the maximum technically permissible mass declared by the manufacturer: … % slope
2.1.5.L1e — L7eMaximum pay mass declared by manufacturer: … kg
2.1.6.L1e — L7eSafe load carrying capacity of load platform declared by manufacturer: … kg
2.1.7.L1e — L7eTechnically permissible maximum towable mass in case of (4): Braked: … kg Unbraked: … kg
2.1.7.1L1e — L7eTechnically permissible maximum laden mass of the combination: … kg
2.1.7.2.L1e — L7eTechnically permissible maximum mass at the coupling point: … kg
2.1.8.L1e — L7eMass of the optional equipment: … kg
2.1.9.L1e — L7eMass of the superstructure: … kg
2.1.10.L1e — L7eMass of the propulsion battery: … kg
2.1.11.L2e, L4e, L5e, L6e, L7eMass of the doors: … kg
2.1.12.L2e-U, L5e-B, L6e-BU, L7e-CUMass of the machines or equipment installed on the load platform area: … kg
2.1.13.L1e — L7eMass of the gaseous fuel system as well as storage tanks for gaseous fuel: … kg
2.1.14.L1e — L7eMass of the storage tanks to store compressed air: … kg
2.2. Range of vehicle dimensions (overall)
2.2.1.L1e — L7eLength: … mm
2.2.2.L1e — L7eWidth: … mm
2.2.3.L1e — L7eHeight: … mm
2.2.4.L1e — L7eWheelbase: … mm
2.2.4.1.L4eWheelbase sidecar(28): … mm
2.2.5.Track width
2.2.5.1.

L1e — L7e if equipped with twinned wheels

L2e, L4e, L5e, L6e, L7e

Track width front: … mm.
2.2.5.2.L1e — L7e if equipped with twinned wheelsTrack width rear: … mm.
2.2.5.3.L2e, L4e, L5e, L6e, L7eTrack width sidecar: … mm.
2.2.6.L7e-BFront overhang: … mm.
2.2.7.L7e-BRear overhang: … mm.
2.2.8.Load platform dimensions
2.2.8.1.L2e-U, L5e-B, L6e-BU, L7e-B2, L7e-CULength of the load platform: … mm.
2.2.8.2.L2e-U, L5e-B, L6e-BU, L7e-B2, L7e-CUWidth of load platform: … mm.
2.2.8.3.L2e-U, L5e-B, L6e-BU, L7e-B2, L7e-CUHeight of load platform: … mm.
2.2.9.Centre of gravity
2.2.9.1.L2e-U, L5e-B, L6e-BU, L7e-B2, L7e-CULocation of the centre of gravity forward of the rear axle Lcg: … mm.
2.2.9.2.L2e-U, L5e-B, L6e-BU, L7e-B2, L7e-CULocation of the centre of gravity above the ground plane Hcg: … mm.
2.2.9.3.L2e-U, L5e-B, L6e-BU, L7e-B2, L7e-CULocation centre of gravity of loaded platform forward of the rear axle LcgLP: … mm.
2.2.10.Miscellaneous dimensions
2.2.10.1.L7e-B2Approach angle(11): … degrees.
2.2.10.2.L7e-B2Departure angle(11): … degrees.
2.2.10.3.L7e-B2Ramp angle(11): … degrees.
2.2.10.4.L7e-B2Ground clearance under the front axle(11): … mm.
2.2.10.5.L7e-B2Ground clearance under the rear axle(11): … mm.
2.2.10.6.

L3e-AxE (x=1, 2 or 3), L3e-AxT (x=1, 2 or 3)

L7e-B

Ground clearance between the axles(11): … mm.
2.2.10.7.L7e-BWheelbase to ground clearance ratio … [no unit]
2.2.10.8.L7e-B2Static stability coefficient — Kst: … [no unit]
2.2.10.9.L3e-AxE, L3e-AxTSeat height: … mm
2.2.10.10.L3e-AxE, L3e-AxTGround clearance: … mm
3. GENERAL POWERTRAIN CHARACTERISTICS
3.1 Manufacturer of the propulsion unit
3.1.1. Combustion engine
3.1.1.1.L1e — L7eManufacturer: …
3.1.1.2.L1e — L7eEngine code (as marked on the engine or other means of identification): …
3.1.1.3.L1e — L7eFuel identification marking (if available): …
3.1.2. Electric motor
3.1.2.1.L1e — L7eManufacturer: …
3.1.2.2.L1e — L7eElectric motor code (as marked on the engine or other means of identification): …
3.1.3. Hybrid application
3.1.3.1.L1e — L7eManufacturer: …
3.1.3.2.L1e — L7eApplication code (as marked on the engine or other means of identification): …
3.1.3.3.L1e — L7eFuel identification marking (if available): …
3.1.3.4.L1e — L7ePhotographs and/or drawings of the location of the code(s) and/or type-approval numbers (completed example with dimensions)(20): …
3.2. Combustion engine
3.2.1. Specific engine information
3.2.1.1.L1e — L7eNumber of combustion engines: …
3.2.1.2.L1e — L7eWorking principle: internal combustion engine (ICE)/positive ignition/compression ignition /external combustion engine (ECE)/turbine/compressed air(4): …
3.2.1.3.L1e — L7eCycle: four-stroke/two-stroke/rotary/other(4): …
3.2.1.4.L1e — L7eCylinders
3.2.1.4.1.L1e — L7eNumber: …
3.2.1.4.2.L1e — L7eArrangement(26): …
3.2.1.4.3.L1e — L7eBore(12): … mm
3.2.1.4.4.L1e — L7eStroke(12): … mm
3.2.1.4.5.L1e — L7eNumber and configuration of stators in the case of rotary-piston engine: …
3.2.1.4.6.L1e — L7eVolume of combustion chambers in the case of rotary-piston engine: … cm3
3.2.1.4.7.L1e — L7eFiring order: …
3.2.1.5.L1e — L7eEngine capacity(6): … cm3
3.2.1.6.L1e — L7eVolumetric compression ratio(7): …
3.2.1.7.L1e — L7eNumber of inlet and exhaust valves
* 3.2.1.7.1.L1e — L7eNumber and minimum cross-sectional areas of inlet and outlet ports: …
* 3.2.1.7.2.L1e — L7eValve timing or equivalent data: …
* 3.2.1.7.3.L1e — L7eMaximum lift of valves, angles of opening and closing, or timing details of alternative distribution systems, in relation to dead centres. For variable timing system, minimum and maximum timing: …
* 3.2.1.7.4.L1e — L7eReference and/or setting ranges(4): …
3.2.1.8.L1e — L7eDrawings of combustion chamber, cylinder head, piston, piston rings: …
3.2.1.9.L1e — L7eNormal warm engine idling speed: … min-1
3.2.1.10.L1e — L7eStop-start system: yes/no(4)
* 3.2.2. Powertrain/propulsion/drive-train management system
3.2.2.1.L1e — L7ePCUs/ECUs(4) software identification number(s): … and calibration verification number(s): …
3.2.3. Fuel
3.2.3.1.L1e — L7eFuel type: (9)
3.2.3.2.L1e — L7eVehicle fuel configuration: mono-fuel/bi- fuel/flex fuel(4)
3.2.3.2.1.L1e — L7eMaximum amount of bio-fuel acceptable in fuel: … % by volume
3.2.4. Fuel pressure delivery and control
3.2.4.1.L1e — L7eBrief description and schematic drawing of low-and/or high-pressure fuelling wet system(s)(4): …
3.2.4.2.L1e — L7eLow- and/or high-pressure fuel pump(s): yes/no(4)
3.2.4.2.1.L1e — L7eFuel pump control: mechanical/on/off electric/continuous operation/electronically controlled variable operation(4): …
3.2.4.2.2.L1e — L7e

For CI combustion engines and dual fuel engines only maximum fuel delivery (4)(7): … g/s or mm3/stroke or cycle at an engine speed of:…min-1 or, alternatively, a characteristic diagram: …

(When boost control is supplied, state the characteristic fuel delivery and boost pressure versus engine speed)

3.2.4.3.L1e — L7eCommon rail: yes/no(4)
3.2.4.4.L1e — L7eFuel distributor/rail/hoses(4): yes/no(4)
3.2.4.5.L1e — L7eFuel pressure and/or fuel flow regulator(s): yes/no(4)
3.2.5. Fuel mass metering and control
3.2.5.1.L1e — L7eBy carburettor(s): yes/no(4)
* 3.2.5.1.1.L1e — L7eOperating principle and construction: …
* 3.2.5.1.2.L1e — L7eMaximum fuel-flow rate: … g/s at maximum power and torque: …
3.2.5.1.3.L1e — L7eCarburettor(s) settings(7): …
* 3.2.5.1.4.L1e — L7eCarburettor diffusers: …
* 3.2.5.1.5.L1e — L7eCarburettor fuel-level in float chamber: …
* 3.2.5.1.5.1.L1e — L7eCarburettor mass of float: …
3.2.5.1.6.L1e — L7eCarburettor cold-starting system: manual/automatic(4): yes/no(4)
3.2.5.1.6.1.L1e — L7eCarburettor cold-starting system operating principle(s): …
3.2.5.1.7.L1e — L7eMixture scavenging port: yes/no(4)
3.2.5.1.7.1.L1e — L7eMixture scavenging port dimensions: …
3.2.5.2.L1e — L7eBy mechanically/hydraulically controlled fuel injection(4): yes/no(4)
3.2.5.2.1.L1e — L7eOperation principle: …
3.2.5.2.2.L1e — L7eMechanical/electronic(4) adjustment of maximum fuel mass delivery: yes/no(4)
3.2.5.3.L1e — L7eBy electronically controlled fuel injection system: yes/no(4)
3.2.5.3.1.L1e — L7eOperation principle: port injection/direct injection/pre-chamber/swirl chamber(4): …
3.2.5.3.2.L1e — L7eFuel injector(s): single-/multi-point/direct injection/other (specify) (4): …
3.2.5.3.3.L1e — L7eTotal and per cylinder amount of fuel injectors: …
3.2.5.4.L1e — L7eAir-assisted fuel injector: yes/no(4): …
3.2.5.4.1.L1e — L7eDescription and operating pressure of air-assist: …
3.2.5.5.L1e — L7eCold start system: yes/no(4)
3.2.5.5.1.L1e — L7eDescription of cold start system: …
3.2.5.6.L1e — L7eAuxiliary starting aid: yes/no(4)
3.2.5.7.L1e — L7eCI injection specific: yes/no
3.2.5.7.1.L1e — L7eStatic injection timing(7): …
3.2.5.7.2.L1e — L7eInjection advance curve(7): …
3.2.6. Gaseous fuelling system and control
3.2.6.1.L1e — L7eBrief description and schematic drawing of gaseous fuelling system(s): …
3.2.6.2.L1e — L7eLiquefied petroleum gas (LPG) fuelling system: yes/no(4)
3.2.6.2.1.L1e — L7eType-approval number according to UNECE Regulation No 67f1: …
3.2.6.2.2.L1e — L7eElectronic engine management control unit for LPG fuelling: yes/no(4)
3.2.6.2.2.1.L1e — L7eEmission-related adjustment possibilities: …
3.2.6.2.3.L1e — L7eFurther documentation: …
* 3.2.6.2.3.1L1e — L7eDescription of the safeguarding of the catalyst at switch-over from petrol to LPG or back: …
3.2.6.2.3.2L1e — L7eSystem layout (electrical connections, vacuum connections, compensation hoses, etc.): …
3.2.6.2.4.L1e — L7eDrawing of the symbol: …
3.2.6.3.L1e — L7eNatural gas (NG) fuelling system: yes/no(4)
3.2.6.3.1.L1e — L7eType-approval number according to UNECE Regulation No 110f2: …
3.2.6.3.2.L1e — L7eElectronic engine management-control unit for NG fuelling: yes/no(4)
3.2.6.3.2.1.L1e — L7eEmission-related adjustment possibilities: …
3.2.6.3.3.L1e — L7eFurther documentation: …
* 3.2.6.3.3.1.L1e — L7eDescription of the safeguarding of the catalyst at switch-over from petrol to NG or back: …
3.2.6.3.3.2.L1e — L7eSystem layout (electrical connections, vacuum connections compensation hoses, etc.): …
3.2.6.3.4.L1e — L7eDrawing of the symbol: …
3.2.6.4.L1e — L7eGaseous fuel: LPG/NG-H/NG-L/NG-HL(4): yes/no(4)
3.2.6.4.1.L1e — L7ePressure regulator(s) or vaporiser/pressure regulator(s)(4)
* 3.2.6.4.1.1.L1e — L7eNumber of pressure reduction stages: …
3.2.6.4.1.2.L1e — L7ePressure in final stage, minimum: … kPa — maximum: … kPa
3.2.6.4.1.3.L1e — L7eNumber of main adjustment points: …
3.2.6.4.1.4.L1e — L7eNumber of idle adjustment points: …
3.2.6.4.1.5.L1e — L7eType-approval number: …
3.2.6.4.2.L1e — L7eFuelling system: mixing unit/gas injection/liquid injection/direct injection(4)
* 3.2.6.4.2.1.L1e — L7eMixture strength regulation: …
3.2.6.4.2.2.L1e — L7eSystem description and/or diagram and drawings: …
3.2.6.4.2.3.L1e — L7eType-approval number: …
3.2.6.4.3.L1e — L7eMixing unit: yes/no(4)
3.2.6.4.3.1.L1e — L7eNumber: …
3.2.6.4.3.2.L1e — L7eLocation: …
3.2.6.4.3.3.L1e — L7eAdjustment possibilities: …
3.2.6.4.3.4.L1e — L7eType-approval number: …
3.2.6.4.4.L1e — L7eInlet manifold injection: yes/no(4)
3.2.6.4.4.1.L1e — L7eInjection: single-point/multi-point(4)
3.2.6.4.4.2.L1e — L7eInjection: continuous/simultaneously timed/sequentially timed(4)
3.2.6.4.5.L1e — L7eInjection equipment: yes/no(4)
3.2.6.4.5.1.L1e — L7eAdjustment possibilities: …
3.2.6.4.5.2.L1e — L7eType-approval number: …
3.2.6.4.6.L1e — L7eSupply pump: yes/no(4)
3.2.6.4.6.1.L1e — L7eType-approval number: …
3.2.6.4.7.L1e — L7eInjector(s): …
3.2.6.4.7.1.L1e — L7eType-approval number: …
3.2.6.4.8.L1e — L7eDirect/port injection: yes/no(4)
3.2.6.4.9.L1e — L7eInjection pump/pressure regulator: yes/no (4)
3.2.6.4.9.1.L1e — L7eType-approval number: …
3.2.6.4.10.L1e — L7eSeparate electronic control unit (ECU) for gaseous fuelling system: yes/no(4)
3.2.6.4.10.1.L1e — L7eAdjustment possibilities: …
3.2.6.4.10.2.L1e — L7eSoftware identification number(s): …
3.2.6.4.10.3.L1e — L7eCalibration verification number(s): …
3.2.6.5.L1e — L7eNG fuel-specific equipment: …
3.2.6.5.1.L1e — L7eVariant 1 (only in the case of approvals of engines for several specific fuel compositions): …
3.2.6.5.2.L1e — L7eFuel composition:

Overview

methane (CH4):basis: …%molemin. …%molemax. …%mole
ethane (C2H6):basis: …%molemin. …%molemax. …%mole
propane (C3H8):basis: …%molemin. …%molemax. …%mole
butane (C4H10):basis: …%molemin. …%molemax. …%mole
C5/C5+:basis: …%molemin. …%molemax. …%mole
oxygen (O2):basis: …%molemin. …%molemax. …%mole
inert (N2, He, etc.):basis: …%molemin. …%molemax. …%mole
3.2.6.5.3.L1e — L7eGaseous fuel injector(s): …
3.2.6.5.4.L1e — L7eVariant 2 (only in the case of approvals for several specific fuel compositions): …
3.2.6.6.L1e — L7eHydrogen fuel-specific equipment: yes/no(4)
3.2.6.6.1.L1e — L7eEC type-approval number according to Regulation (EC) No 79/2009 of the European Parliament and of the Councilf3: …
* 3.2.6.6.2.L1e — L7eFurther documentation
3.2.6.6.3.L1e — L7eSystem layout (electrical connections, vacuum connections, compensation hoses, etc.): …
* 3.2.6.6.4.L1e — L7eDescription of the safeguarding of the catalyst at switch-over from petrol to hydrogen/H2NG(4) or back: …
3.2.6.6.5.L1e — L7eDrawing of the symbol: …
3.2.6.7.L1e — L7eH2NG fuelling system: yes/no(4)
3.2.6.7.1.L1e — L7ePercentage of hydrogen in the fuel (the maximum specified by the manufacturer): …
3.2.7. Air-induction system
3.2.7.1.L1e — L7eBrief description and schematic drawing of gaseous intake air-flow and induction system: …
3.2.7.2.L1e — L7eIntake manifold description and working principle (e.g. fixed length/variable length/swirl valves)(4) (include detailed drawings and/or photos): …
* 3.2.7.2.1.L1e — L7eDescription and drawings of inlet pipes and their accessories (plenum chamber, heating device with control strategy, additional air intakes, etc.): …
3.2.7.3.L1e — L7eIntake air pressure charger: yes/no(4)
3.2.7.3.1.L1e — L7eBrief description and schematic drawing of the intake air-pressure charger system: …
3.2.7.3.2.L1e — L7eWorking and control principles: …
3.2.7.3.3.L1e — L7eType(s) (turbo or supercharger, other)(4): …
3.2.7.3.4.L1e — L7eMaximum intake air-charge pressure and flow-rate at maximum torque and power: … kPa and g/s or charge pressure and flow-rate map: … kPa and g/s
3.2.7.4.L1e — L7eWaste gate: yes/no(4)
3.2.7.5.L1e — L7eIntercooler: yes/no(4)
3.2.7.5.1.L1e — L7eType: air-air/air-water/other(4)
* 3.2.7.5.2.L1e — L7eIntake depression at rated engine speed and at 100 % load (compression ignition engines only): … kPa
3.2.7.6.L1e — L7eAir filter, (drawings, photographs): …
3.2.7.7.L1e — L7eIntake air-silencer description (drawings, photographs): …
* 3.2.7.7.1.L1e — L7eWorking principle: …
3.2.8. Air-mass metering and control
3.2.8.1.L1e — L7eBrief description and schematic drawing of air-mass metering and control system: …
3.2.8.2.L1e — L7eMechanical throttle body: yes/no(4)
3.2.8.3.L1e — L7eElectronic throttle control (ETC): yes/no(4)
3.2.8.3.1.L1e — L7eSchematic drawing of electronic throttle control: …
* 3.2.8.3.1.2.L1e — L7eDescription of ETC hardware redundancies regarding sensors/actuators/electric power/ground/control electronics: …
3.2.9. Spark delivery system and control
3.2.9.1.L1e — L7eBrief description and schematic drawing of spark delivery and control system: …
3.2.9.1.1.L1e — L7eWorking principle: …
L1e — L7eIgnition advance curve or map(7) at wide open throttle: …
3.2.9.1.3.L1e — L7eStatic ignition timing (7): … degrees before TDC at maximum torque and power
3.2.9.2.L1e — L7eIon sense capability: yes/no(4)
3.2.9.3.L1e — L7eSpark plugs:
3.2.9.3.1.L1e — L7eGap setting: … mm
3.2.9.4.L1e — L7eIgnition coil(s):
* 3.2.9.4.1.L1e — L7eWorking principle: …
* 3.2.9.4.2.L1e — L7eDwell angle and timing at wide open throttle: …
3.2.10. Powertrain cooling system and control
3.2.10.1.L1e — L7eBrief description and schematic drawing of powertrain cooling and control system: …
3.2.10.2.L1e — L7eCooling system: liquid: yes/no(4)
3.2.10.2.1.L1e — L7eMaximum temperature at outlet: … K
3.2.10.2.2.L1e — L7eNominal setting of the engine temperature control mechanism: …
3.2.10.2.3.L1e — L7eNature of liquid: …
3.2.10.2.4.L1e — L7eCirculating pump(s): yes/no(4)
3.2.10.2.4.1.L1e — L7eCharacteristics: …
3.2.10.2.5.L1e — L7eDrive ratio(s): …
3.2.10.2.6.L1e — L7eDescription of the fan and its drive mechanism: …
3.2.10.3.L1e — L7eAir cooling: yes/no(4)
3.2.10.3.1.L1e — L7eReference point: …
3.2.10.3.2.L1e — L7eMaximum temperature at reference point: … K
3.2.10.3.3.L1e — L7e)Fan: yes/no(4)
3.2.10.3.3.1.L1e — L7eCharacteristics: …
3.2.10.3.3.2.L1e — L7eDrive ratio(s): …
3.2.11. Powertrain lubrication system and control
3.2.11.1.L1e — L7eBrief description and schematic drawing of powertrain lubrication and control system: …
3.2.11.2.L1e — L7eLubrication system configuration(s) (wet sump, dry sump, other, pump/injection into induction system/mixed with the fuel, etc.)(4): …
3.2.11.3.L1e — L7eLocation of oil reservoir (if any): …
3.2.11.4.L1e — L7eFeed system (pump/injection into induction system/mixed with the fuel, etc.)(4): …
3.2.11.5.L1e — L7eLubricating pump: yes/no(4) …
3.2.11.6.L1e — L7eOil cooler: yes/no(4)
3.2.11.6.1.L1e — L7eDrawing …
3.2.11.7.L1e — L7eLubricant(s) characteristics: …
3.2.11.8.L1e — L7eLubricant mixed with the fuel: yes/no(4): …
3.2.11.8.1.L1e — L7ePercentage range of lubricant mixed with the fuel: …
3.2.12. Exhaust system and control
3.2.12.1.L1e — L7eBrief description and schematic drawing of exhaust devices for noise and tailpipe emission control: …
3.2.12.2.L1e — L7eDescription and drawing of the exhaust manifold: …
3.2.12.3.L1e — L7eDescription and detailed drawing of the exhaust device: …
3.2.12.4.L1e — L7eMaximum permissible exhaust back-pressure at rated engine speed and at 100 % load: … kPa(29)
3.2.12.5.L1e — L7eType, marking of exhaust noise-abatement device(s): …
* 3.2.12.6.L1e — L7eNoise-reducing measures in the engine compartment and on the engine where relevant for external noise: …
3.2.12.7.L1e — L7eLocation of the exhaust outlet: …
3.2.12.8.L1e — L7eExhaust noise-abatement device containing fibrous materials: yes/no(4): …
3.2.13. Other electrical systems and control than those intended for the electrical propulsion
3.2.13.1.L1e — L7eRated voltage: … V, positive/negative ground(4)
3.2.13.2.L1e — L7eGenerator: yes/no(4):
3.2.13.2.1.L1e — L7eNominal output: … VA
3.2.13.3.L1e — L7eBattery(ies): yes/no(4)
3.2.13.3.1.L1e — L7eCapacity and other characteristics (mass,…): …
3.2.13.4.L1e — L7eElectric heating systems for the passenger compartment: yes/no(4)
3.3. Pure electric and hybrid electric propulsion and control
3.3.1.L1e — L7eElectric vehicle configuration: pure electric/hybrid electric/manpower — electric(4):
3.3.2.L1e — L7eBrief description and schematic drawing of pure and hybrid electric propulsions and its control system(s): …
3.3.3. Electric propulsion motor
3.3.3.1.L1e — L7eNumber of electric motors for propulsion: …
3.3.3.2.L1e — L7eType (winding, excitation): …
3.3.3.3.L1e — L7eOperating voltage: … V
F13.3.3.4. L1e — L7e 15/30 (4) minutes power (27) : … kW
3.3.4. Propulsion batteries
3.3.4.1.L1e — L7ePrimary propulsion battery
3.3.4.1.1.L1e — L7eNumber of cells: …
3.3.4.1.2.L1e — L7eMass: … kg
3.3.4.1.3.L1e — L7eCapacity: … Ah (Amp-hours) / … V
3.3.4.1.4.L1e — L7eVoltage: … V
3.3.4.1.5.L1e — L7ePosition in the vehicle: …
3.3.4.2.L1e — L7eSecondary propulsion battery
3.3.4.2.1.L1e — L7eNumber of cells: …
3.3.4.2.2.L1e — L7eMass: … kg
3.3.4.2.3.L1e — L7eCapacity: … Ah (Amp-hours) / … V
3.3.4.2.4.L1e — L7eVoltage: … V
3.3.4.2.5.L1e — L7ePosition in the vehicle: …
3.3.5. Hybrid electric vehicle
3.3.5.1.L1e — L7eEngine or motor combination (number of electric motor(s) and/or combustion engine(s)/other)(4): …
3.3.5.2.L1e — L7eCategory of hybrid electric vehicle: off-vehicle charging/not off-vehicle charging:
3.3.5.3.L1e — L7eOperating mode switch: with/without(4)
3.3.5.4.L1e — L7eSelectable modes: yes/no(4)
3.3.5.5.L1e — L7ePure fuel consuming: yes/no(4)
3.3.5.6.L1e — L7eVehicle propelled with fuel cell: yes/no(4)
3.3.5.7.L1e — L7eHybrid operation modes: yes/no(4) (if yes, short description): …
3.3.6. Energy storage device
3.3.6.1.L1e — L7eDescription: (battery, capacitor, flywheel/generator)(4)
3.3.6.2.L1e — L7eIdentification number: …
* 3.3.6.3.L1e — L7eKind of electrochemical couple: …
3.3.6.4.L1e — L7eEnergy (for battery: voltage and capacity Ah in 2h, for capacitor: J,…, for flywheel/generator: J,…,): …
3.3.6.5.L1e — L7eCharger: on-board/external/without(4)
3.3.7. Electric motor (describe each type of electric motor separately) …
3.3.7.1.L1e — L7ePrimary use: propulsion motor/generator(4)
3.3.7.2.L1e — L7eWhen used as propulsion motor: single-/multi-motors (number)(4): …
3.3.7.3.L1e — L7eWorking principle: …
3.3.7.4.L1e — L7eDirect current/alternating current/number of phases: …
3.3.7.5.L1e — L7eSeparate excitation/series/compound(4):
3.3.7.6.L1e — L7eSynchronous/asynchronous(4):
3.3.8. Electric motor control unit
3.3.8.1.L1e — L7eIdentification number: …
3.3.9. Power controller
3.3.9.1.L1e — L7eIdentification number: …
3.4. Other engines, electric motors or combinations (specific information concerning the parts of these motors)
3.4.1. Cooling system (temperatures permitted by the manufacturer)
3.4.1.1.L1e — L7eLiquid cooling: …
3.4.1.1.1.L1e — L7eMaximum temperature at outlet: … K
3.4.1.2.L1e — L7eAir cooling: …
3.4.1.2.1.L1e — L7eReference point: …
3.4.1.2.2.L1e — L7eMaximum temperature at reference point: … K
3.4.2. Lubrication system
3.4.2.1.L1e — L7eDescription of lubrication system: …
3.4.2.2.L1e — L7eLocation of oil reservoir (if any): …
3.4.2.3.L1e — L7eFeed system (pump/injection into induction system/mixed with the fuel, etc.)(4): …
3.4.2.4.L1e — L7eLubricant mixed with the fuel: …
3.4.2.4.1.L1e — L7ePercentage: …
3.4.2.5.L1e — L7eOil cooler: yes/no(4): …
* 3.4.2.5.1.L1e — L7eDrawing(s): …
3.5. Drive-train and control (13)
3.5.1.L1e — L7eBrief description and schematic drawing of the vehicle drive-train and its control system (gear shift control, clutch control or any other element of drive-train): …
3.5.2. Clutch
3.5.2.1.L1e — L7eBrief description and schematic drawing of the clutch and its control system: …
3.5.3. Transmission
3.5.3.1.L1e — L7eBrief description and schematic drawing of gear shift system(s) and its control: …
3.5.3.2.L1e — L7eDrawing of the transmission: …
3.5.3.3.L1e — L7eType (mechanical, hydraulic, electric, manual/manual automated/automatic/CVT/ other (indicate).)(4): …
3.5.3.4.L1e — L7eA brief description of the electrical/electronic components (if any): …
3.5.3.5.L1e — L7eLocation relative to the engine: …
3.5.3.6.L1e — L7eMethod of control: …
F23.5.4. L1e — L7e Gear ratios

Overview gear ratios

Gear (24) Internal transmission ratios (ratios of engine to transmission output shaft revolutions) Final drive ratio(s) (ratio of transmission output shaft to driven wheel revolutions) Total gear ratios Ratio (engine speed/vehicle speed) for manual transmission only

1

2

3

…

Reverse
3.5.4.1.

L3e-AxE,

L3e-AxT

Final drive ratio: …
3.5.4.2.

L3e-AxE,

L3e-AxT

Overall gear ratio in highest gear: …
3.6. Safe-cornering device
3.6.1.L1e — L7e equipped with twinned wheels, L2e, L5e, L6e, L7eSafe-cornering device (Annex VIII to Regulation (EU) No 168/2013: yes/no(4); differential/other(4)
3.6.2.L1e — L7e equipped with twinned wheels, L2e, L5e, L6e, L7eDifferential lock: yes/no/optional(4)
3.6.3.L1e — L7eBrief description and schematic drawing of the safe-cornering device, the differential lock and their control systems: …
3.7. Suspension and control
3.7.1.L1e — L7eBrief description and schematic drawing of suspension and its control system: …
3.7.2.L1e — L7eDrawing of the suspension arrangements: …
3.7.3.L1e — L7eLevel adjustment: yes/no/optional(4)
3.7.4.L1e — L7eBrief description of the electrical/electronic components: …
3.7.5.L1e — L7eStabilisers: yes/no/optional(4)
3.7.6.L1e — L7eShock absorbers: yes/no/optional(4)
3.8. Passenger-compartment heating system and air-conditioning
3.8.1. Passenger-compartment heating system
3.8.1.1.L2e, L5e-B, L6e-B, L7eAn overall drawing of the heating system giving its location on the vehicle (and the arrangement of the sound damping devices (including the position of the heat exchange points)): …
3.8.1.2.L2e, L5e-B, L6e-B, L7eAn overall drawing of the heat-exchanger used in systems utilising the heat from the exhaust gases, or of the parts where that exchange takes place (in the case of heating systems using the heat provided by the engine cooling air): …
3.8.1.3.L2e, L5e-B, L6e-B, L7eA sectional drawing of the heat-exchanger or parts where heat exchange takes place, together with a statement of the wall thickness, of the materials used and the characteristics of their surface: …
3.8.1.4.L2e, L5e-B, L6e-B, L7eSpecifications regarding the method of manufacture and technical data relating to other major components of the heating system, such as the fan: …
3.8.2. Air-conditioning
3.8.2.1.L2e, L5e-B, L6e-B, L7eBrief description and schematic drawing of air-conditioning and its control system: …
3.8.2.2.L2e, L5e-B, L6e-B, L7eGas used as refrigerant in the air-conditioning system: …
3.8.2.3.L2e, L5e-B, L6e-B, L7eThe air-conditioning system is designed to contain fluorinated greenhouse gases with global warming potential higher than 150: yes/no(4). If Yes, fill in the following sections:
3.8.2.3.1.L2e, L5e-B, L6e-B, L7eDrawing and brief description of the air-conditioning system, including the reference or part number and material of the leak components: …
3.8.2.3.2.L2e, L5e-B, L6e-B, L7eLeakage of the air-conditioning system
3.8.2.3.3.L2e, L5e-B, L6e-B, L7eReference or part number and material of the components of the system and test information (e.g. test report number, Type-approval number, etc.): …
3.8.2.3.4.L2e, L5e-B, L6e-B, L7eOverall leakage/year of the entire system: … g/year
3.9. Cycles designed to pedal
3.9.1.L1eRatio manpower/electric power: …
3.9.2.L1eMaximum assistance factor: …
3.9.3.L1eMaximum vehicle speed for which the electric motor gives assistance: … km/h
3.9.4.L1eSwitch-off distance: … km
4. GENERAL INFORMATION ON ENVIRONMENTAL AND PROPULSION PERFORMANCE
4.0 General information on environmental and propulsion performance
F34.0.1. L1e — L7e Environmental step: Euro (3/4/5/5+) (4)
4.0.2. L1e — L7e Fuel consumption (provide details for each reference fuel tested) … l/kg (4) /100 km
4.0.3. L1e — L7e CO 2 emissions (25) : … g/km
4.0.4. L1e — L7e Energy consumption (25) : … Wh/km
4.0.5. L1e — L7e Electric range (25) : … km
4.1. Tailpipe emission-control system
4.1.1.L1e — L7eBrief description and schematic drawing of the tailpipe emission-control system and its control: …
4.1.2. Catalytic converter
4.1.2.1.L1e — L7eConfiguration, number of catalytic converters and elements (information to be provided for each separate unit): …
4.1.2.2.L1e — L7eDrawing with dimensions, shape and volume of the catalytic converter(s): …
4.1.2.3.L1e — L7eCatalytic reaction: …
* 4.1.2.4.L1e — L7eTotal charge of precious metals: …
* 4.1.2.5.L1e — L7eRelative concentration: …
* 4.1.2.6.L1e — L7eSubstrate (structure and material): …
* 4.1.2.7.L1e — L7eCell density: …
* 4.1.2.8.L1e — L7eCasing for the catalytic converter(s): …
4.1.2.9.L1e — L7eLocation of the catalytic converter(s) (place and reference distance in the exhaust line): …
4.1.2.10.L1e — L7eCatalyst heat-shield: yes/no(4)
4.1.2.11.L1e — L7eBrief description and schematic drawing of the regeneration system/method of exhaust after-treatment systems and its control system: …
* 4.1.2.11.1.L1e — L7eNormal operating temperature range: … K
4.1.2.11.2.L1e — L7eConsumable reagents: yes/no(4)
4.1.2.11.3.L1e — L7eBrief description and schematic drawing of the reagent flow (wet) system and its control system: …
4.1.2.11.4.L1e — L7eType and concentration of reagent needed for catalytic action: …
* 4.1.2.11.5.L1e — L7eNormal operational temperature range of reagent: … K
4.1.2.11.6.L1e — L7eFrequency of reagent refill: continuous/maintenance(4)
4.1.2.12.L1e — L7eIdentifying part number: …
4.1.3. Oxygen sensor(s)
4.1.3.1.L1e — L7eOxygen sensor component(s) drawing(s): …
4.1.3.2.L1e — L7eDrawing of exhaust device with oxygen sensor location(s) (dimensions relative to exhaust valves): …
4.1.3.3.L1e — L7eControl range(s): …
4.1.3.4.L1e — L7eIdentifying part number(s): …
4.1.3.5.L1e — L7eDescription of oxygen sensor heating system and heating strategy: …
4.1.3.6.L1e — L7eOxygen sensor heat shield(s): yes/no(4)
4.1.4. Secondary air-injection (air-inject in exhaust)
4.1.4.1.L1e — L7eBrief description and schematic drawing of the secondary air-injection system and its control system: …
4.1.4.2.L1e — L7eConfiguration (mechanical, pulse air, air pump etc.)(4): …
4.1.4.3.L1e — L7eWorking principle: …
4.1.5. External exhaust gas recirculation (EGR)
4.1.5.1.L1e — L7eBrief description and schematic drawing of the EGR system (exhaust flow) and its control system: …
4.1.5.2.L1e — L7eCharacteristics: …
4.1.5.3.L1e — L7eWater-cooled EGR system: yes/no(4)
4.1.5.4.L1e — L7eAir-cooled EGR system: yes/no(4)
4.1.6. Particulate filter
4.1.6.1.L1e — L7ePT component drawing with dimensions, shape and capacity of the particulate filter: …
4.1.6.2.L1e — L7eDesign of the particulate filter: …
4.1.6.3.L1e — L7eBrief description and schematic drawing of the particulate filter and its control system: …
4.1.6.4.L1e — L7eLocation (reference distance in the exhaust line): …
4.1.6.5.L1e — L7eMethod or system of regeneration, description and drawing: …
4.1.6.6.L1e — L7eIdentifying part number: …
4.1.7. Lean NOx trap
4.1.7.1.L1e — L7eOperation principle of lean NOx trap: …
4.1.8. Additional tailpipe emission-control devices (if any not covered under another heading)
4.1.8.1.L1e — L7eWorking principle: …
4.2. Crankcase emission control system
4.2.1.L1e — L7eConfiguration of crank-case gas recycling system (breather system, positive crank-case ventilation system, other)(4) (description and drawings).
4.3. Evaporative emission control system
4.3.1.L1e — L7eEvaporative emissions control system: yes/no(4)
4.3.2.L1e — L7eDrawing of the evaporative control system
4.3.3.L1e — L7eDrawing of the canister (including dimensions and indicating vent and purge mechanism)
4.3.4.L1e — L7eWorking capacity: … g
4.3.5.L1e — L7eAdsorption material: … (e.g. charcoal, carbon, synthetic, …)
4.3.6.L1e — L7eHousing material: … (e.g. plastic, steel, …)
4.3.7.L1e — L7eSchematic drawing of the fuel tank, indicating capacity and material: …
4.3.8.L1e — L7eDrawing of the heat-shield between tank and exhaust device: …
4.4. Additional information on environmental and propulsion unit performance
4.4.1.L1e — L7eDescription and/or schematic drawings of additional pollution-control devices: …
4.4.2.L1e — L7eLocation of the coefficient of absorption symbol (compression-ignition engines only): …
4.4.3.L1e — L7eApplicable information document set out in respectively UN Regulation No 9, 41 or 63 shall supplement this information document with regard to the sound level.
4.4.4.L1e — L7eApplicable information document set out in respectively UN Regulation No 92 shall supplement this information document with regards to the noise-abatement devices installed on the vehicle.
5. VEHICLE PROPULSION FAMILY
5.1.L1e — L7eTo define the vehicle propulsion family, the manufacturer shall submit the information required for classification criteria set out in point 3 of Annex XI to Commission Delegated Regulation (EU) No 134/2014, if not already provided in the information document.
6. INFORMATION ON FUNCTIONAL SAFETY
6.1. Audible warning devices
6.1.1.L1e — L7eSummary description of device(s) used and their purpose: …
6.1.2.L1e — L7eDrawing(s) showing the location of the audible warning device(s) in relation to the structure of the vehicle: …
6.1.3.L1e — L7eDetails of the method of attachment, including the part of the vehicle structure to which the audible warning device(s) is (are) attached: …
6.1.4.L1e — L7eElectrical/pneumatic circuit diagram: …
6.1.4.1.L1e — L7eVoltage: AC/DC(4)
6.1.4.2.L1e — L7eRated voltage or pressure: …
6.1.5.L1e — L7eDrawing of the mounting device: …
6.2. Braking, including anti-lock and combined braking systems
6.2.1.L1e — L7eCharacteristics of the brakes, including details and drawings of the drums, discs, hoses, make and type of shoe/pad assemblies and/or linings, effective braking areas, radius of drums, shoes or discs, mass of drums, adjustment devices, relevant parts of the axle(s) and suspension, levers, pedals (4): …
6.2.2.L1e — L7eOperating diagram, description and/or drawing of the braking system, including details and drawings of the transmission and controls as well as a brief description of the electrical and/or electronic components used in the braking system(4):
6.2.2.1.L1e — L7eFront, rear and sidecar brakes, disc and/or drum(4):
6.2.2.2.L1e — L7eParking braking system: …
6.2.2.3.L1e — L7eAny additional braking system: …
6.2.3.L1e — L7eVehicle is equipped to tow a trailer with no brake/overrun brake/electric/pneumatic/hydraulic service brakes: yes/no(4): …
6.2.4.L1e — L7eAnti-lock/Combined braking system
6.2.4.1.L1e — L7eAnti-lock braking system: yes/no/optional(4)
6.2.4.2.L1e — L7eCombined braking system: yes/no/optional(4)
6.2.4.3.L1e — L7eAnti-lock and combined braking system: yes/no/optional(4)
6.2.4.4.L1e — L7eSchematic drawing(s): …
6.2.5.L1e — L7eHydraulic reservoir(s) (volume and location): …
6.2.6.L1e — L7eParticular characteristics of the braking system(s)
6.2.6.1.L1e — L7eBrake shoes and/or pads(4): …
6.2.6.2.L1e — L7eLinings and/or pads (indicate make, type, grade of material or identification mark): …
6.2.6.3.L1e — L7eBrake levers and/or pedals(4): …
6.2.6.4.L1e — L7eOther devices (where applicable): drawing and description: …
6.3. Electrical safety
6.3.1.L1e — L7eBrief description of the power circuit components installation and drawings/photographs showing the location of the power circuit components installation: …
6.3.2.L1e — L7eSchematic diagram of all electrical functions included in power circuit: …
6.3.3.L1e — L7eWorking voltage(s) (V): …
6.3.4.L1e — L7eDescription of protection against electric-shocks: …
6.3.5.L1e — L7eFuse and/or circuit breaker yes/no/optional(4)
6.3.5.1.L1e — L7eDiagram showing the functional range: …
6.3.6.L1e — L7eConfiguration of power wiring harness: …
6.4. Front and rear protective structures
6.4.1. Front protective structure
6.4.1.1.L1e — L7eDetailed technical description (including photographs or drawings): …
6.4.1.2.L1e — L7eMaterials used: …
6.4.2. Rear protective structure
6.4.2.1.L1e — L7eDetailed technical description (including photographs or drawings): …
6.4.2.2.L1e — L7eMaterials used: …
6.5. Glazing, windscreen wipers and washers, and defrosting and demisting systems
6.5.1. Windscreen
6.5.1.1.L2e, L5e, L6e, L7eMaterials used: …
6.5.1.2.L2e, L5e, L6e, L7eMethod of mounting: …
6.5.1.3.L2e, L5e, L6e, L7eAngle of inclination: …
6.5.1.4.L2e, L5e, L6e, L7eWindscreen accessories and the position in which they are fitted, together with a brief description of any electrical/electronic components: …
6.5.1.5.L2e, L5e, L6e, L7eDrawing of the windscreen with dimensions: …
6.5.2. Other windows
6.5.2.1.L2e, L5e, L6e, L7eMaterials used: …
6.5.2.2L2e, L5e, L6e, L7eA brief description of the electrical/electronic components (if any) of the window lifting mechanism: …
6.5.3. Opening roof glazing
6.5.3.1.L2e, L5e, L6e, L7eMaterials used: …
6.5.4. Other glass panes
6.5.4.1.L2e, L5e, L6e, L7eMaterials used: …
6.6. Windscreen wiper(s)
6.6.1.L2e, L5e, L6e, L7eDetailed technical description (including photographs or drawings): …
6.7. Windscreen washer
6.7.1.L2e, L5e, L6e, L7eDetailed technical description (including photographs or drawings): …
6.7.2.L2e, L5e, L6e, L7eCapacity of the reservoir: … l
6.8. Defrosting and demisting
6.8.1.L2e, L5e, L6e, L7eDetailed technical description (including photographs or drawings): …
6.9. Driver-operated controls including identification of controls, tell-tales and indicators
6.9.1.L1e — L7eArrangement and identification of controls, tell-tales and indicators: …
6.9.2.L1e — L7ePhotographs and/or drawings of the arrangement of symbols and controls, tell-tales and indicators: …
6.9.3.L1e — L7eControls, tell-tales and indicators for which, when fitted, identification is mandatory, including the identification symbols to be used for that purpose:
6.9.4.L1e — L7e

Summary table: the vehicle is equipped with the following driver-operated controls, including indicators and tell-tales(4)

Controls, tell-tales and indicators for which, when fitted, identification is mandatory, and symbols to be used for that purpose

  1. (+)
    x

  2. yes

    3. -

  3. no or not separately available

    4. o

  4. optional.

  1. (++)
    d

  2. directly on control, indicator or tell-tale

    3. c

  3. in close vicinity.
Symbol NoDeviceControl / indicator availablef4 Identified by symbol Wheref5 Tell-tale available Identified by symbol Where
1Master light
2Dipped-beam head lamps
3Main-beam head lamps
4Position (side) lamps
5Front fog lamps
6Rear fog lamp
7Headlamp levelling device
8Parking lamps
9Direction indicators
10Hazard warning
11Windscreen wiper
12Windscreen washer
13Windscreen wiper and washer
14Headlamp cleaning device
15Windscreen demisting and defrosting
16Rear window demisting and defrosting
17Ventilating fan
18Diesel pre-heat
19Choke
20Brake failure
21Fuel level
22Battery charging condition
23Engine coolant temperature
24Malfunction indicator light (MI)
6.9.5.L1e — L7e

Controls, tell-tales and indicators for which, when fitted, identification is optional, and symbols which shall be used if they are to be identified

  1. (+)
    x

  2. yes

    3. -

  3. no or not separately available

    4. o

  4. optional.

  1. (++)
    d

  2. directly on control, indicator or tell-tale

    3. c

  3. in close vicinity.
Symbol NoDeviceControl / indicator availablef6 Identified by symbol Wheref7 Tell-tale available Identified by symbol Where
1Parking brake
2Rear window wiper
3Rear window washer
4Rear window wiper and washer
5Intermittent windscreen wiper
6Audible warning device (horn)
7Front hood (bonnet)
8Rear hood (boot)
9Seat belt
10Engine oil pressure
11Unleaded petrol
12…
13…
6.10. Speedometer and odometer
6.10.1. Speedometer
6.10.1.1.L1e — L7ePhotographs and/or drawings of the complete system: …
6.10.1.2.L1e — L7eVehicle speed range displayed: …
6.10.1.3.L1e — L7eTolerance of the measuring mechanism of the speedometer: …
6.10.1.4.L1e — L7eTechnical constant of the speedometer: …
6.10.1.5.L1e — L7eMethod of operation and description of the drive mechanism: …
6.10.1.6.L1e — L7eOverall transmission ratio of the drive mechanism: …
6.10.2. Odometer
6.10.2.1.L1e — L7eTolerance of the measuring mechanism of the odometer: …
6.10.2.2.L1e — L7eMethod of operation and description of the drive mechanism: …
6.11. Installation of lighting, light-signalling devices, including automatic switching of lighting
6.11.1.L1e — L7eList of all devices (mentioning the number, make(s),type, component type-approval mark(s), the maximum intensity of the main-beam headlamps, colour, the corresponding tell-tale): …
6.11.2.L1e — L7eDiagram showing the location of the lighting and light-signalling devices: …
6.11.3.L1e — L7eHazard warning lamps: …
6.11.4.L1e — L7eBrief description of the electrical and/or electronic components used in the lighting system and in the light-signalling system: …
6.11.5.L1e — L7eFor every lamp and reflector, supply the following information (in writing and/or by diagram):
6.11.5.1.L1e — L7eDrawing showing the extent of the illuminating surface: …
6.11.5.2.L1e — L7eMethod used to define the apparent surface in accordance with point 2.10 of UNECE Regulation No 48 (OJ L 323, 6.12.2011, p. 46): …
6.11.5.3.L1e — L7eAxis of reference and centre of reference: …
6.11.5.4.L1e — L7eMethod of operation of concealable lamps: …
6.11.6.L1e — L7eDescription/drawing and type of headlamp levelling device (e.g. automatic, stepwise manually adjustable, continuously manually adjustable)(4): …
6.11.6.1.L1e — L7eControl device: …
6.11.6.2.L1e — L7eReference marks: …
6.11.6.3.L1e — L7eMarks assigned for loading conditions: …
6.12. Rearward visibility
6.12.1. Rear-view mirrors (stating for each mirror)
6.12.1.1.L1e — L7eDrawing(s) for the identification of the mirror showing the position of the mirror relative to the vehicle structure: …
6.12.1.2.L1e — L7eDetails of the method of attachment including that part of the vehicle structure to which it is attached: …
6.12.1.3.L1e — L7eA brief description of the electronic components of the adjustment system: …
6.12.2.L1e — L7e Devices for indirect vision other than mirrors
6.12.2.1.L1e — L7eDescription of the device: …
6.12.2.2.L1e — L7eIn the case of a camera-monitor device, the detection distance (mm), contrast, luminance range, glare correction, display performance (black and white/colour(4)), image repetition frequency, luminance reach of the monitor(4): …
6.12.2.3.L1e — L7eSufficiently detailed drawings to identify the complete device, including installation instructions; the position for the EU type-approval mark has to be indicated on the drawings: …
6.13. Rollover protective structure (ROPS)
6.13.1.L7e-B2Detailed technical description, position, fixing, etc. (including photographs or drawings): …
6.13.2. ROPS by Frame(4)
6.13.2.1.L7e-B2Internal and external dimensions: …
6.13.2.2.L7e-B2Material(s) and method of construction: …
6.13.3. ROPS by Cab (4)
6.13.3.1.L7e-B2Other weather protection arrangements (description): …
6.13.3.2.L7e-B2Internal and external dimensions: …
6.13.4. ROPS by Roll bar(s) mounted at front/rear(4), fold-down/not fold down (4)
6.13.4.1.L7e-B2Dimensions: …
6.13.4.2.L7e-B2Material(s) and method of construction: …
6.14. Safety belts and/or other restraints
6.14.1.L2e, L4e, L5e-B, L6e-B, L7e

Number and position of safety belts and restraint systems and seats on which they can be used, please fill out table below:

(L = left side, R = right side, C = centre)

Safety belt configuration and associated information

L = left, C= centre, R=right
Complete EU type-approval markVariant, if applicableBelt adjustment device for height (indicate yes/no/optional)
First row of seatsL
C
R
Second row of seatsL
C
R
6.14.2.L2e, L4e, L5e-B, L6e-B, L7eDescription of a specific type of belt, with one anchorage attached to the seat back-rest or incorporating an energy-dissipation device: …
6.14.3.L2e, L4e, L5e-B, L6e-B, L7eNumber and location of the anchorages: …
6.14.4.L2e, L4e, L5e-B, L6e-B, L7eBrief description of electrical/electronic components: …
6.15. Safety belt anchorages
6.15.1.L2e, L4e, L5e-B, L6e-B, L7ePhotographs and/or drawings of the bodywork showing the true, effective location and dimensions of the anchorages, together with an indication of the R-point: …
6.15.2.L2e, L4e, L5e-B, L6e-B, L7eDrawings of the anchorages and the parts of the vehicle structure to which they are attached (together with a statement on the nature of the materials used): …
6.15.3.L2e, L4e, L5e-B, L6e-B, L7eDesignation of the types of belts(14) authorised for attachment to the anchorages on the vehicle: …

Safety-belt anchorage configuration and associated information

Anchorage location
Vehicle structureSeat structure
First row of seats
Right-hand seat

Lower anchorages

Upper anchorages

outboard inboard
Centre seat

Lower anchorages

Upper anchorages

right left
Left-hand seat

Lower anchorages

Upper anchorages

outboard inboard
Second row of seats
Right-hand seat

Lower anchorages

Upper anchorages

outboard inboard
Centre seat

Lower anchorages

Upper anchorages

right left
Left-hand seat

Lower anchorages

Upper anchorages

outboard inboard
6.15.4.L2e, L4e, L5e-B, L6e-B, L7eType-approval mark for each position: …
6.15.5.L2e, L4e, L5e-B, L6e-B, L7eSpecial devices (example: seat-height adjustment, preloading device, etc.): …
6.15.6.L2e, L4e, L5e-B, L6e-B, L7ePhotographs and/or drawings of the bodywork showing the true, effective location and dimensions of the anchorages, together with an indication of the R-point: …
6.15.7.L2e, L4e, L5e-B, L6e-B, L7eObservation: …
6.16. Seating positions (saddles and seats)
6.16.1.L1e — L7eNumber of seating positions: …
6.16.1.1.L2e, L5e, L6e, L7eLocation and arrangement(8): …
6.16.2.L1e — L7eSeating position configuration: seat/saddle(4)
6.16.3.L1e — L7eDescription and drawings of:
6.16.3.1.L1e — L7eThe seats and their anchorages: …
6.16.3.2.L1e — L7eThe adjustment system: …
6.16.3.3.L1e — L7eThe displacement and locking systems: …
6.16.3.4.L1e — L7eThe seat-belt anchorages incorporated in the seat structure: …
6.16.3.5.L1e — L7eThe parts of the vehicle used as anchorages: …
6.16.4.L2e, L4e, L5e-B, L6e-B, L7eCoordinates or drawing of the R-point(s) of all seating positions: …
6.16.4.1.L2e, L4e, L5e-B, L6e-B, L7eDriver’s seat: …
6.16.4.2.L2e, L4e, L5e-B, L6e-B, L7eAll other seating positions: …
6.16.5.L1e — L7eDesign torso angle: …
6.16.5.1.L1e — L7eDriver’s seat: …
6.16.5.2.L1e — L7eAll other seating positions: …
6.16.6.L1e — L7eRange of seat adjustment: …
6.16.6.1.L1e — L7eDriver’s seat: …
6.16.6.2.L1e — L7eAll other seating positions: …
6.17. Steer-ability, cornering properties and turn-ability
6.17.1.L1e — L7eSchematic diagram of steered axle(s) showing steering geometry: …
6.17.2. Transmission and control of steering
6.17.2.1.L1e — L7eConfiguration of steering transmission (specify for front and rear): …
6.17.2.2.L1e — L7eLinkage to wheels (including other than mechanical means; specify for front and rear): …
6.17.2.2.1.L1e — L7eA brief description of the electrical/electronic components: …
6.17.2.3.L1e — L7eDiagram of the steering transmission: …
6.17.2.4.L2e, L5e, L6e, L7eSchematic diagram(s) of the steering control(s): …
6.17.2.5.L2e, L5e, L6e, L7eRange and method of adjustment of the steering control(s): …
6.17.2.6.L2e, L5e, L6e, L7eMethod of assistance: …
6.17.3. Maximum steering angle of the wheels
6.17.3.1.L1e — L7eTo the right: … degrees; number of turns of the steering wheel (or equivalent data): …
6.17.3.2.L1e — L7eTo the left: … degrees; number of turns of the steering wheel (or equivalent data): …
6.18. Tyres/wheels combination
6.18.1. Tyres:
6.18.1.1.Size designation
6.18.1.1.1.L1e — L7eAxle 1: …
6.18.1.1.2.L1e — L7eAxle 2: …
6.18.1.1.3.L4eSidecar wheel: …
6.18.1.2.L1e — L7eMinimum load-capacity index: … with the maximum load on each tyre: … kg
6.18.1.3.L1e — L7eMinimum-speed category symbol compatible with the theoretical maximum design vehicle speed: …
6.18.1.4.L1e — L7eTyre pressure(s) as recommended by the vehicle manufacturer: … kPa
6.18.2. Wheels:
6.18.2.1.L1e — L7eRim size(s): …
6.18.2.2.L1e — L7eCategories of use compatible with the vehicle: …
6.18.2.3.L1e — L7eNominal rolling circumference: …
6.19. Vehicle maximum speed limitation plate and its location on the vehicle
6.19.1.L7e-B1 and L7e-B2Maximum speed limitation plate (indicate the reflecting material used; drawings and photos may be used as appropriate): …
6.19.2.L7e-B1 and L7e-B2Location of maximum speed limitation plate (indicate variants where necessary; drawings and photos may be used as appropriate): …
6.19.3.L7e-B1 and L7e-B2Height above road surface, upper edge: … mm
6.19.4.L7e-B1 and L7e-B2Height above road surface, lower edge: … mm
6.19.5.L7e-B1 and L7e-B2Distance of the centre line from the longitudinal median plane of the vehicle: … mm
6.19.6.L7e-B1 and L7e-B2Distance from the left vehicle edge: … mm
6.20. Vehicle occupant protection, including interior fittings and vehicle doors
6.20.1. Bodywork
6.20.1.1.L2e, L5e-B, L6e-B, L7eMaterials used and methods of construction: …
6.20.2. Occupant doors, latches and hinges
6.20.2.1.L2e, L5e, L6e, L7eNumber of doors, and its configuration, dimensions and maximum angle of opening(5): …
6.20.2.2.L2e, L5e, L6e, L7eDrawing of latches and hinges and of their position in the doors: …
6.20.2.3.L2e, L5e, L6e, L7eTechnical description of latches and hinges: …
6.20.2.4.L2e, L5e, L6e, L7eDetails, including dimensions, of entrances, steps and necessary handles where applicable: …
6.20.3. Interior protection for occupants
6.20.3.1.L2e, L5e, L6e, L7ePhotographs, drawings and/or an exploded view of the interior fittings, showing the parts in the passenger compartment and the materials used (with the exception of interior rear view mirrors, arrangement of controls, seats and the rear part of seats), roof and opening roof, backrest: …
6.20.4. Head restraints
6.20.4.1.L2e, L5e, L6e, L7eHead restraints: integrated/detachable/separate(4)
6.20.4.2.L2e, L5e, L6e, L7eDetailed description of the head restraint, specifying in particular the nature of the padding material or materials and, where applicable, the position and specifications of the braces and anchorage pieces for the type of seat for which approval is sought: …
6.20.4.3.L2e, L5e, L6e, L7eIn the case of a ‘separate’ head restraint
6.20.4.3.1.L2e, L5e, L6e, L7eDetailed description of the structural zone to which the head restraint is intended to be fixed: …
6.20.4.3.2.L2e, L5e, L6e, L7eScale drawings of the significant parts of the structure and the head restraint: …
6.21. Maximum continuous total power and/or maximum vehicle speed limitation by design
6.21.1. Propulsion and/or drive-train output governors
6.21.1.1.L1e — L7eNumber (minimum two, exemption L3e-A3 and L4e-A3):
6.21.1.2.L1e — L7eHow is the redundancy of governors ensured?: …
6.21.1.3.L1e — L7eNominal cut-off point no 1: …
6.21.1.3.1.L1e — L7eEngine/motor/drive-train rotation speed at which cut-off starts under load: … min-1
6.21.1.3.2.L1e — L7eMaximum rotation speed at the minimum engine load: … min-1
6.21.1.4.L1e — L7eNominal cut-off point no 2: …
6.21.1.4.1L1e — L7eEngine/motor/drive-train rotation speed at which cut-off starts under load(4): … min-1
6.21.1.4.2.L1e — L7eMaximum rotation speed at the minimum engine load: … min-1
6.21.1.5.L1e — L7eThe stated purpose of governor(s): maximum design vehicle speed limitation/maximum power limitation/engine over-speed protection(4): …
7. INFORMATION ON VEHICLE CONSTRUCTION
7.1. Coupling devices and attachments
7.1.1.L1e — L7eL-category vehicle equipped with coupling device: yes/no/optional(4)
7.1.2.L1e — L7eGuidelines and information for consumers in all EU languages regarding the impact on the driveability of using a trailer with an L-category vehicle included in the owner's manual: yes/no(4)
7.1.3.L1e — L7eFor coupling-device approved as separate technical unit: installation and operating instructions added to documentation: yes/no(4)
7.1.4.L1e — L7ePhotographs and/or drawings showing the position and the construction of the coupling-devices: …
7.1.5.L1e — L7eInstructions for attaching the coupling-type to the vehicle and photographs or drawings of the fixing points on the vehicle as stated by the manufacturer; additional information, if the use of the coupling-type is restricted to certain variants or versions of the vehicle type: …
7.1.6.L1e — L7eAttachment points for a secondary coupling and/or breakaway cable (drawings and pictures may be used as appropriate): yes/no(4)
7.2. Devices to prevent unauthorised use
7.2.1. Protective device
7.2.1.1.L1e — L7eSummary description of protective device(s) used: …
7.2.2. Vehicle immobiliser
7.2.2.1.L1e — L7eTechnical description of the vehicle immobiliser and of the measures taken against inadvertent activation: …
7.2.3. Alarm system
7.2.3.1.L1e — L7eDescription of the alarm system and of the vehicle parts involved in its installation: …
7.2.3.2.L1e — L7eList of the main components comprising the alarm system: …
7.3. Electromagnetic compatibility (EMC)
7.3.1.L1e — L7eRequirements under UNECE Regulation No 10 (OJ L 254, 20.9.2012, p. 1) are met with relevant documentation included in the information document: yes/no(4)
7.3.2.L1e — L7eTable or drawing of radio-interference control equipment: …
7.3.3.L1e — L7eParticulars of the nominal value of the direct-current resistance, and, in the case of resistive ignition cables, of their nominal resistance per metre: …
7.4. External projections
7.4.1.L1e — L7evehicles with bodyworkGeneral arrangement (drawing or photographs accompanied if necessary by dimensional details and/or text) indicating the position of the attached sections and views, of any parts of the exterior surface which can be regarded as critical for external projections, for example, and where relevant: bumpers, floor line, door and window pillars, air-intake grilles, radiator grille, windscreen wipers, rain gutter channels, handles, slide rails, flaps, door hinges and locks, hooks, eyes, winches, decorative trim, badges, emblems and recesses and any other parts of the exterior surface which can be regarded as critical (e.g. lighting equipment): …
7.5. Fuel storage
7.5.1. Fuel tank(s)
7.5.1.1.Main fuel tank(s)
7.5.1.1.1.L1e — L7eMaximum capacity: …
7.5.1.1.2.L1e — L7eMaterials used: …
7.5.1.1.3.L1e — L7eFuel tank inlet: restricted orifice/label(4) …
7.5.1.2.Reserve fuel tank(s)
7.5.1.2.1.L1e — L7eMaximum capacity: …
7.5.1.2.2.L1e — L7eMaterials used: …
7.5.1.2.3.L1e — L7eFuel tank inlet: restricted orifice/label(4) …
7.5.1.3.L1e — L7eDrawing and technical description of the tank(s) with connections and lines of the breathing and venting system, locks, valves, fastening devices: …
7.5.1.4.L1e — L7eDrawing clearly showing the position of the tank(s) in the vehicle: …
7.5.1.5.L1e — L7eDrawing of the heat shield between tank and exhaust device: …
7.5.2. Compressed natural gas (CNG) container(s)
7.5.2.1.L1e — L7eApplicable information document set out in UNECE regulation No 110f8 as prescribed for vehicle category M1 shall supplement this information document with regards to the CNG tanks installed on the vehicle.
7.5.3.L1e — L7e Liquefied petroleum gas (LPG)container(s)
7.5.3.1.L1e — L7eApplicable information document set out in UNECE regulation No 67f9 as prescribed for vehicle category M1 shall supplement this information document with regards to the LPG tanks installed on the vehicle.
7.6. On-board diagnostics (OBD) functional requirements
7.6.1 On-board diagnostics system
7.6.1.1.L1e — L7eStage I: yes/no(4) and/or
7.6.1.2.L1e — L7eStage II: yes/no(4)
7.6.2. OBD system general information
7.6.2.1.L3e—L7e(10) Written description and/or drawing of the malfunction indicator (MI): …
7.6.2.2.L3e—L7e(10) List and purpose of all components monitored by the OBD system: …
7.6.2.3.L3e— L7e(10) Written description (general working principles) for all OBD stage I circuit (open circuit, shorted low and high, rationality) and electronics (PCU/ECU internal and communication) diagnostics: …
7.6.2.4.L3e—L7e(10) Written description (general working principles) for all OBD stage I diagnostic functionality triggering any operating mode which significantly reduces engine torque in case of fault detection: …
7.6.2.5.L3e— L7e(10) Written description of the communication protocol(s) supported: …
7.6.2.6.L3e—L7e(10) Physical location of diagnostic-connector (add drawings and photographs): …
7.6.2.7.L3e— L7e(10) Written description in case of voluntary compliance with OBD stage II (general working principles):
7.6.2.7.1.L3e — L7e(10) Positive-ignition engines
7.6.2.7.1.1.L3e — L7e(10) Catalyst monitoring: …
7.6.2.7.1.2.L3e — L7e(10) Misfire detection: …
7.6.2.7.1.3.L3e — L7e(10) Oxygen sensor monitoring: …
7.6.2.7.1.4.L3e — L7e(10) Other components monitored by the OBD system: …
7.6.2.7.2.L3e — L7e(10) Compression-ignition engines
7.6.2.7.2.1.L3e — L7e(10) Catalyst monitoring: …
7.6.2.7.2.2.L3e — L7e(10) Particulate filter monitoring: …
7.6.2.7.2.3.L3e — L7e(10) Electronic fuelling system monitoring: …
7.6.2.7.2.4.L3e — L7e(10) deNOx system monitoring: …
7.6.2.7.2.5.L3e — L7e(10) Other components monitored by the OBD system: …
7.6.2.7.3L3e — L7e(10) Criteria for MI activation (fixed number of driving cycles or statistical method): …
7.6.2.7.4.L3e — L7e(10) List of all OBD output codes and formats used (with explanation of each): …
7.6.3.

OBD compatibility

The following additional information shall be provided by the vehicle manufacturer to enable the manufacture of OBD-compatible replacement or service parts, diagnostic tools and test equipment:

7.6.3.1.L3e — L7e(10) A comprehensive document describing all sensed components concerned with the strategy for fault detection and MI activation (fixed number of driving cycles or statistical method). This shall, include a list of relevant secondary sensed parameters for each component monitored by the OBD system. The document shall also list all OBD output codes and formats (with an explanation of each) used in association with individual emission-related powertrain components and individual non-emission-related components, where monitoring the component is used to determine MI activation. This shall contain, in particular, a comprehensive explanation for the data given in service $05 Test ID $ 21 to FF and the data given in service $06: …
7.6.3.2.L3e — L7e(10) For vehicle types using a communication link in accordance with ISO 15765-4 ‘Road vehicles, diagnostics on controller area network (CAN) — Part 4: requirements for emissions-related systems’, the manufacturer shall provide a comprehensive explanation for the data given in service $06 Test ID $00 to FF, for each OBD monitor ID supported: …
7.6.3.3.L3e — L7e(10) The information required above may be provided in table form as described below.

Example OBD fault-code overview list

ComponentFault codeMonitoring strategyFault detection criteriaMI activation criteriaSecondary parametersPreconditioningDemonstration test
Intake air temperature sensor open circuitP0xxxxzzComparison with temperature model after cold start> 20 degr difference between measured and modelled intake air temperature3rd cycleCoolant and intake air temperature sensor signalsTwo type I cyclesType I
7.6.3.4.L3e — L7e(10) Description of ETC diagnostic fault codes: …
F47.6.3.5. L3e — L7e (10) Description of the default modes which a driver may experience in case of an ETC failure
7.6.4.

Communication protocol information

The following information shall be referenced to a specific vehicle make, model and variant, or identified using other workable definitions such as VIN or vehicle and systems identification:

7.6.4.1.L3e — L7e(10) Any protocol information system needed to enable complete diagnostics in addition to the standards prescribed in point 3.8. of Appendix 1 to Annex XII to Commission Delegated Regulation (EU) No 44/2014, such as additional hardware or software protocol information, parameter identification, transfer functions, ‘keep alive’ requirements, or error conditions;
7.6.4.2.L3e — L7e(10) Details of how to obtain and interpret all fault codes not in accordance with the standards prescribed in point 3.11. of Appendix 1 to Annex XII to Commission Delegated Regulation (EU) No 44/2014
7.6.4.3.L3e — L7e(10) A list of all available live data parameters including scaling and access information;
7.6.4.4.L3e — L7e(10) A list of all available functional tests including device activation or control and the means to implement them;
7.6.4.5.L3e — L7e(10) Details of how to obtain all component and status information, time stamps, pending DTC and freeze frames;
7.6.4.6.L3e — L7e(10) PCU/ECU identification and variant coding;
7.6.4.7.L3e — L7e(10) Details of how to reset service lights;
7.6.4.8.L3e — L7e(10) Location of diagnostic connector and connector details;
7.6.4.9.L3e — L7e(10) Engine code identification.
7.6.5. Test and diagnosis of OBD monitored components
7.6.5.1.L3e — L7e(10) A description of tests to confirm its functionality, at the component or in the harness:
7.7. Passenger handholds and footrests
7.7.1. Handholds
7.7.1.1.L1e — L7eConfiguration: strap and/or handle(4)
7.7.1.3.L1e — L7ePhotographs and/or drawings showing the location and the construction:
7.7.2. Footrests
7.7.2.1.L1e — L7ePhotographs and/or drawings showing the location and the construction:
7.8. Registration plate space
7.8.1.L1e — L7eLocation of rear registration plate (indicate variants where necessary; drawings may be used as appropriate): …
7.8.1.1.L1e — L7eHeight above road surface, upper edge: … mm
7.8.1.2.L1e — L7eHeight above road surface, lower edge: … mm
7.8.1.3.L1e — L7eDistance of the centre line from the longitudinal median plane of the vehicle: … mm
7.8.1.4.L1e — L7eDimensions (length x width): … mm x … mm
7.8.1.5.L1e — L7eInclination of the plane to the vertical: … degr.
7.8.1.6.L1e — L7eAngle of visibility in the horizontal plane: … degr
7.9. Stands
7.9.1.L1e, L3eConfiguration: central and/or side(4): …
7.9.2.L1e, L3eConstruction material used: …
7.9.3.L1e, L3ePhotographs and drawings showing the location of the stand(s) in relation to the structure of the vehicle: …
7.9.4.L1e, L3eDescription of the method to prevent contact of the stand with the ground when the vehicle is being propelled: …

Annotations

Textual amendments

F1

Inserted by Commission Implementing Regulation (EU) 2016/1825 of 6 September 2016 amending Implementing Regulation (EU) No 901/2014 with regard to the administrative requirements for the approval and market surveillance of two- or three-wheel vehicles and quadricycles (Text with EEA relevance).

F2

Substituted by Commission Implementing Regulation (EU) 2016/1825 of 6 September 2016 amending Implementing Regulation (EU) No 901/2014 with regard to the administrative requirements for the approval and market surveillance of two- or three-wheel vehicles and quadricycles (Text with EEA relevance).

F3

Substituted by Commission Implementing Regulation (EU) 2020/239 of 20 February 2020 amending Implementing Regulation (EU) No 901/2014 with regard to the adaptation of the templates for type-approval procedures for two- or three-wheel vehicles and quadricycles to the environmental steps Euro 5 and Euro 5+ requirements (Text with EEA relevance).

F4

Inserted by Commission Implementing Regulation (EU) 2020/239 of 20 February 2020 amending Implementing Regulation (EU) No 901/2014 with regard to the adaptation of the templates for type-approval procedures for two- or three-wheel vehicles and quadricycles to the environmental steps Euro 5 and Euro 5+ requirements (Text with EEA relevance).

Footnotes

f1

OJ L 72, 14.3.2008, p. 1.

f2

OJ L 120, 7.5.2011, p. 1.

f3

Regulation (EC) No 79/2009 of the European Parliament and of the Council of 14 January 2009 on type-approval of hydrogen-powered motor vehicles, and amending Directive 2007/46/EC (OJ L 35, 4.2.2009, p. 32).

f4
  1. (+)
    x

  2. yes

    3. -

  3. no or not separately available

    4. o

  4. optional.

f5
  1. (++)
    d

  2. directly on control, indicator or tell-tale

    3. c

  3. in close vicinity.

f6
  1. (+)
    x

  2. yes

    3. -

  3. no or not separately available

    4. o

  4. optional.

f7
  1. (++)
    d

  2. directly on control, indicator or tell-tale

    3. c

  3. in close vicinity.

f8

OJ L 120, 7.5.2011, p. 1.

f9

OJ L 72, 14.3.2008, p. 1.